The MikroTik MTCNA certificate is the first certificate in MikroTik’s certified training programs, and it is a prerequisite for other certificates.
By the end of this training session, the student will be familiar with RouterOS software and RouterBOARD products, and they will be able to connect the client to the Internet. They will also be able to configure, manage, perform basic troubleshooting of a MikroTik router, and provide basic services to clients.
After passing the exam, each participant will get the offical certification + License Level4/P1 for RouterBOARD/CHR/x86 (worth 40 €)
Target audience:
Network engineers and technicians wanting to deploy and support corporate networks and Client CPEs (WISPs and ISPs).
Course prerequisites:
-Candidate must have a good understanding of TCP/IP and subnetting.
-Cisco CCNA, or Networking fundamentals course, is recommended.
-Intermediate level of English language.
-Each candidate should bring his/her Laptop.
Duration:
3 days, 6 hours per day, total of 18 hours.
Language:
English
MikroTik MTCNA exam format
-Multiple choice examination questions.
-25 questions.
-Passing percentage 60%
-60 minutes duration.
Location:
Istanbul, Turkey.
Costs:
The training + Exam= 350 €.
Course Outline
Module 1:- Introduction
-About MikroTik
-First time accessing the router
-RouterOS command line interface CLI
-RouterOS CLI principles
-Initial configuration Internet access
-Upgrading RouterOS
-Router identity
-Manage RouterOS logins
-Manage RouterOS services
-Managing configuration backups
-Resetting a RouterOS device
-Reinstalling a RouterOS device Netinstall
-RouterOS license levels
Module 2 :- DHCP
-DHCP server and client
-DHCP client
-DHCP server setup
-Leases management
-DHCP server network configuration
-Address Resolution Protocol (ARP)
-ARP modes
-RouterOS ARP table
Module 3 :- Bridging
-Bridging overview
-Bridge concepts and settings
-Creating bridges
-Adding ports to bridges
-Bridge wireless networks
-Station bridge
Module 4 :- Routing
-Routing overview
-Routing concepts
-Route flags
-Static routing
-Creating routes
-Setting default route
-Managing dynamic routes
-Implementing static routing in a simple network
Module 5 :- Wireless
-802.11a/b/g/n/ac Concepts
-Setup a simple wireless link
-Access Point configuration
-Station configuration
-Wireless Security and Encryption
Module 6 :-Firewall
-Firewall principles
-Connection tracking and states
-Structure, chains and actions
-Firewall Filter in action
-Filter actions
-Protecting your router input
-Protection your customers forward
-Basic Address-List
-Source NAT
-Masquerade and src-nat action
-Destination NAT
-dst-nat and redirect actions
Module 7:- QoS
-Simple Queue
-Target
-Destinations
-Max-limit and limit-at
-Bursting
-One Simple queue for the whole network
-pcq-rate
-pcq-limit
Module 8:- Tunnels
-PPP settings
-PPP profile
-PPP secret
-PPP status
-IP pool
-Creating pool
-Managing ranges
-Assigning to a service
-PPPoE service-name
-PPPoE client
-PPPoE server
-Point-to-point addresses
-Secure remote networks communication
Module 9 :- Misc
-RouterOS tools
-E-mail
-Netwatch
-Ping
-Traceroute
-Profile (CPU load)
-Monitoring
-Interface traffic monitor
-Torch
-Graphs
Booking
For bookings, more information, and private training, kindly contact us.
